XP GMAXX 2 metal detector details:
The wireless headphone: the transmitter is now integrated on the circuit boards of these four new detectors. It has been designed with two switchable channels. A FREQ SHIFT switch on the front of the detectors enables the two output channels to be toggled quickly and easily: CH 1 or CH 2.
Changing frequency: a new switch (FREQ SHIFT) enables the detection frequency (Freq. 1 or Freq. 2) to be set to reduce any interference from other XP devices being used nearby.
New analogical filters improving the detection of targets in iron infested areas. The masking circle generated by the iron is greatly reduced. Targets of interest in iron infested areas can therefore be detected more easily, thus enabling sweeping operations to be carried out more quickly.
We have also improved the gradation of the sensitivity settings, which are now far more precise. We have "zoomed in" on the range of sensitivity settings, enabling greater fine-tuning in your adjustments giving you the easiest possible sensitivity adjustments.
The G-Maxx II is still a "multi-tone" detector, but user can now adjust the iron level setting by using the IRON THRESHOLD potentiometer. This potentiometer can be viewed as a detection setting with a range only covering iron. It has fine-tuning settings ranging from 0 to 20. At 0, all iron sounds at medium pitch. The higher the setting, the lower the pitch for detected iron. This, for example, enables small nails just to be picked up at a low pitch, whereas larger ones will be detected at medium pitch. As you will doubtless already know, too high a level of discrimination can hinder the performance of a detector. This setting was previously preset at alevel suited to the majority of users. But most of the time, beginners do not want iron to register on their machines, whereas more advanced users prefer to have this option to make it easier to detect targets on difficult terrain.
XP Gmaxx 2 metal detector features:
- Improved sensitivity settings
- New 9” Carbon fibre coil & cover
- New versatile hipmount bag
- 3 Part shaft with twin collar locking system
- Microprocessor analysis of signals
- Multi tone discrimination in ALL METAL mode
- Volume control for low tone (iron volume)
- All metal: Motion mode
- Silencer switch: 3 positions to limit iron false signals
- Ground exlusion: adjustable
- Light and perfectly balanced
- Tough polypropylene arm cup
- Fibreglass lower stem
- Battery life Alkaline: 50 hours
Additional Information •• XP GMAXX 2 metal detector
Product Code | Gmaxx2 |
---|---|
mpn | GMAX2 |
Manufacturer | XP |
Minimum assembled length | 40 inches (102 cm) |
Approximate weight | 1.5 kg |
Operating Frequency | 4.6 kHz |
Battery Type | 8 X AA Alkaline |
Standard Coil Type | Waterproof 9" carbon-fibre (22.5cm) |
Warranty | 5 Years |
