Viking VK40 Metal Detector details:
Viking 40 metal detector with headphones, coil cover, battery.
This is the latest metal detector in the Viking range. The VK40 is set apart from the rest of the Viking range by its 10” concentric search coil and touchpad control system. The larger coil allows larger objects to be detected deeper than with the other Viking detector 8” coils. The touchpad allows quick switching between detection modes and micro-processor allows the detector to be set up as desired and retain those settings whilst not in use. Featured on the VK40 the membrane keypad provides an alternative method of setting up the detector to the traditional rotary controls and switches. All the functions are controlled from the 5 keys provided. A single key press allows the detection mode to be selected, and the Discrimination, Sensitivity and Ground settings can be adjusted using a simple menu system.
Viking VK40 metal detector features:
- • Motion/Non-motion detector
- • All-metal mode
- • Push button Pinpoint
- • Alphanumeric LCD with Target ID
- • Touchpad controls
- • Memory retains detector settings when turned off
- • Beach mode
- • Battery check
- • Loudspeaker
- • Headphone socket (6.3mm)
- • 3 Piece telescopic shaft with locking pin
- • Concentric search coil
- • Waterproof concentric 10” (24cm) search coil
- • 15-20 hours’ use from 1 x alkaline PP3 battery
Additional Information •• Viking VK40 Metal Detector
Product Code | VK40 |
---|---|
mpn | No |
Manufacturer | Viking |
Minimum assembled length | 40.5 inches (103 cm) |
Approximate weight | 1.34 kg |
Operating Frequency | 7.2 KHz |
Battery Type | 1 x 9v PP3 Battery |
Standard Coil Type | 10” Concentric |
Warranty | 2 years |