Metal Detector Specialists
Regton Ltd. 82 Cliveland Street, Birmingham, B19 3SN.
Tel: 0121 359 2379 Email: email@example.com
Garrett MT 5500 Walkthrough Metal Detector
When maximum throughput is top priority, security professionals can depend on the Magnascanner MT 5500 walkthrough metal detector. Coils on both sides of the archway improve traffic flow by helping to locate targets on the left, right or in the centre of the body. Dual alarm lights enhance detection by indicating the side on which a target is located. A head-to-toe uniform detection field removes "hot spots" thereby reducing the likelihood of false alarms. Microprocessor-based circuitry enables the operator to calibrate the detector to meet the needs of various security applications. Touch pad controls and a back lit LCD revealing all of the operating and control functions help ease operator workload.
Garrett MT5500 Archway Features
- A dual access non-resettable code to safeguard calibration settings.
- An audible alarm to reveal any unauthorised access attempts.
- A built-in overhead electronics compartment to eliminate the inconveniences of a cable-connected console.
- Multi-phase frequencies and variable tone settings to facilitate multi-unit operation.
- Modular electronics and unit design for easy on-site assembly and maintenance.
- 2 year warranty.
Weights & Dimensions
|Width||30" (0.76 m)||35" (0.9 m)||35.5" (0.9 m)|
|Height||80" (2 m)||87" (2.2 m)||92" (2.3 m)|
|Depth||23" (0.58 m)||23" (0.58 m)||6.5" (0.17 m)|
|Weight||117lbs (53kg)||139lbs (63kg)|
The Access to the Control Panel is via the front touchpad using secure passcode. It allows authorized users only to change settings such as Program and Sensitivity. Security of the detector's settings is maintained with a non-resettable sequence code, which indicates every attempt at access to the settings by non authorised users. A tamper alarm sounds within 10 seconds after the Access touchpad is pressed unless the authoriesed access code is entered. The programmes on the MT5500 are maintained in an electrically erasable non-volatile memory, for the ultimate in security application versatility. The unit maintains all settings even when disconnected from power and does not require recalibration when unit is turned OFF and back ON. No battery is required for memory retention. When the unit is in operation, a self-test of all systems is performed continuously with any failures or problems reported on the LCD display.
Garrett MT5500 Archway Security Metal Detector
- Operating Temperatures
-4°F (-20° C) to +158°F (70°C); Humidity to 95% non-condensing
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or adjustments required.
- Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures," CEI 529
Dual-level access codes required to set or change all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non-resettable sequence code logs all attempts to access the settings. Audible alarm reports all unauthorized attempts at access
Scratch and mar-resistant laminate with resilient end caps; control panel and cross members of heavy duty aluminum.
Multiple channels permit several MT 5500s and other Garrett detectors to operate simultaneously in close proximity
- Interference Suppression
100% sensor coil Faraday shielding; RFI interference reduced with hardware; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitors. Physical interference minimized by coil design and circuitry
Ready light indicates unit is operational; alarm lights and audible alarms with variable tones are activated when the target amount of metal is detected.
MT 5500 Archway Uses
- School security
- Hospital security
- Courthouse security
- Event security
- Nuclear security
- Loss prevention
- Airport security
- Correctional facilities
- Anti Knife crime
- Warehouse Loss Prevention
- Warehouse Security
Bulk Discounts Available. Garrett Only
Buy 2 units & get discount of
Buy 3-5 units & get discount of
Buy 6-10 units & get discount of
Buy 11+ units & get discount of
We want our customers to have a great shopping experience; however we realise that from time to time things don’t go smoothly.
In the event you don’t find the item you're looking for, or have a query, then our friendly staff team are on hand to help. Simply email or call us.
As a family business with over 100 years combined experience between us, we are sure to help.
Tel: 0121 359 2379
If you are a returning customer you can Login to your account.
If you don't have an account with Regton you can register now.
Don’t want to register? Then feel free to shop as a Guest. Registration is not required to shop with Regton, but is optional if you wish to make repeat purchases quickly and easily.
We love feedback! How did we do? The good, the bad & the ugly…we can take it. We have been in this business long enough to realise it is good to listen to our customers. So please feel free to leave your feedback on our comments page. Or just have a look at what other people have said about us.
Centrally located in the heart of the UK, Birmingham, Regton Ltd is within easy reach of both Birmingham’s main train stations, Digbeth Coach Station and the Spaghetti Junction.
Here you will find information on UK based clubs and membership.
Information and guidance for using your detector within the Metal Detector Code of Conduct.
Common terms associated with security checkpoint screening using metal detectors
The used detector list changes almost daily so please visit this page frequently for the latest second hand metal detectors. We keep our range of second hand machines on display at all times in our shop in Birmingham so if you like you can see them at any time